Pallets in Georgia 2026
Pricing, top industries, Port of Savannah ISPM-15 requirements, and delivery coverage for all 159 Georgia counties.
Pricing, top industries, Port of Savannah ISPM-15 requirements, and delivery coverage for all 159 Georgia counties.
Stamped kiln-dried pallet lumber, bulk warehouse stock, dimensional yard inventory, raw softwood logs, and sawmill operations - the supply chain behind every custom and standard pallet we ship.
Georgia is one of the most pallet-intensive states in the Southeast. With more than 1,500 food and beverage companies, the Port of Savannah handling over 5.5 million TEUs annually, and a growing automotive corridor in West Georgia anchored by Kia (West Point) and Hyundai (Bryan County), demand for pallets runs high year-round.
📨 Need pallets in Georgia? We deliver to all 159 counties -- same-week delivery available on truckload orders.
Get GA Quote →Georgia pricing closely tracks Florida, with slight premiums in metro Atlanta due to demand. Port Savannah customers benefit from proximity to the largest single-campus container facility on the East Coast.
| Pallet Type | Grade | Price Per Unit (GA) | Notes |
|---|---|---|---|
| GMA 48x40 Stringer | A (Near-New) | market rate | Top choice for food/bev |
| GMA 48x40 Stringer | B (Light Use) | market rate | High-volume warehouse standard |
| GMA 48x40 Stringer | C (Marginal) | market rate | Storage / one-way only |
| Block Pallet 48x40 | New | market rate | 4-way entry, pharma/auto preferred |
| Heat Treated (ISPM-15) | A or New | +market rate | Port Savannah export compliance |
| Custom / Odd-Size | New | Quote required | Kia/Hyundai supplier spec |
ⓘ Florida Pallet Supply can be more competitive for your area. Submit a free quote now →
| Industry | Key Cluster | Primary Pallet Needs |
|---|---|---|
| Food & Beverage | Atlanta metro, Moultrie, Valdosta | GMA Grade A, food-grade, FSMA compliant |
| Port / Import-Export | Savannah, Brunswick | ISPM-15 heat treated, new block pallets |
| Automotive | West Point (Kia), Bryan County (Hyundai) | Custom spec, block pallets, high-cycle |
| Cold Storage / Produce | South Georgia (Valdosta, Tifton) | Plastic pallets, food-grade stringer |
| Distribution / 3PL | Atlanta, Savannah, Columbus | High-volume Grade B, bulk pricing |
| Retail DC | Atlanta (Walmart, Kroger, Target DCs) | GMA Grade A, retailer-compliance spec |
The Port of Savannah (Garden City Terminal) is the fourth busiest container port in the US and a critical gateway for Southeast importers and exporters. Any wooden pallets used to ship goods internationally must comply with ISPM-15 standards -- heat treated to 56°C core temperature for 30 continuous minutes and stamped with the IPPC mark.
We supply ISPM-15 compliant heat treated pallets to Savannah area shippers with documented treatment certificates on request. Lead time: 2-5 business days on standard sizes.
| Zone | Counties / Cities | Lead Time |
|---|---|---|
| Metro Atlanta | Fulton, Cobb, Gwinnett, DeKalb, Clayton, Henry, Forsyth | Next day |
| Savannah / Coast | Chatham, Bryan, Effingham, Liberty, McIntosh | 1-2 days |
| Augusta | Richmond, Columbia, Burke, Jefferson | 1-2 days |
| Columbus / West GA | Muscogee, Harris, Troup, Meriwether | 1-2 days |
| South Georgia | Lowndes, Valdosta, Tifton, Colquitt | 2-3 days |
| North Georgia | Hall, Cherokee, Bartow, Murray | 1-2 days |
Most Georgia food and beverage distributors require Grade A (near-new) GMA 48x40 stringer pallets for outbound product. They must be free of chemical contamination, protruding nails, broken boards, and pest evidence. Retailers like Kroger and Walmart (both with major DCs near Atlanta) specify Grade A pallets per their own compliance guides.
Yes -- if your cargo is bound for an international destination, USDA and the importing country's phytosanitary regulations require ISPM-15 compliant pallets bearing the IPPC mark. Domestic shipments within the US do not require ISPM-15 treatment. We can provide documentation and treatment certificates for all export orders.
Metro Atlanta orders placed before noon typically ship same-day or next-day depending on quantity. Truckload orders (580+ pallets per load) often deliver next business day. Smaller LTL quantities may add a day. Call (888) 271-7771 for current availability.
Yes. We supply pallets to multiple Tier 1 and Tier 2 automotive suppliers in the West Point and Bryan County corridors. Automotive applications often call for new block pallets or custom-spec stringer pallets. Send your spec sheet and we will quote within 2 hours.
Minimum order is typically one full truckload (approximately 560-580 GMA pallets per standard 53-foot trailer) for best pricing. We also accommodate partial orders for established customers. Contact us to discuss your volume requirements.
Response within 2 business hours. No obligation.
Kiln-dried hardwood meets NWPCA Uniform Standard for Wood Pallets; moisture content verified <19% at dispatch, blade-cut deck boards, no visible bark.
Citrus packers operating in Florida's three citrus belts (Indian River, Polk County, Highlands County) require Florida-specific phytosanitary documentation; we coordinate with the Florida Citrus Mutual office for compliant freight.
FL DEP solid-waste rules classify wood pallets as recyclable; our recycled pallet stream qualifies for the FL Recycling Business Assistance Center small-business grant program.
48x40 GMA load capacity is 2,800 lb racked (face-loaded), 4,600 lb static, and 2,500 lb dynamic per ASME MH1 2016; deck board span 3.5 inches; deflection under rated load <0.5 inch.
Block pallets (four-way entry) use nine 4-inch hardwood blocks with continuous-face top deck; ideal for ASRS (automated storage and retrieval) and AGV (automated guided vehicle) operations where stringer interruptions cause read-failures.
Buyback programs pay current market rate for returned pallets in Grade A condition; minimum 50 pallets per pickup; integrated with our recycling stream for sustainability reporting.
Concrete and aggregate suppliers use bagged-goods stringers (heavier construction, denser nail pattern) to support 4,000+ lb cement-sack loads; we stock these in our Tampa Bay and Jacksonville warehouses.
Lumber index pricing: we benchmark against the Random Lengths southern yellow pine #2 index for hardwood-blend spec; updates monthly; standing-order pricing protects against +/-15% market swings.
Our Lakeland and Jacksonville recycling streams process 200,000+ pallets per year; broken stock is repaired or chipped for mulch (sold separately); zero-landfill goal targeted for 2027.
Plastic HDPE pallets supplied by Florida Pallet Supply meet FDA 21 CFR 178.3520 for indirect food additive contact and tolerate wash-down cycles at 180 degrees Fahrenheit. Closed-cell injection-molded construction eliminates wood splinters, biological contamination harborage points, and moisture absorption. Standard 48x40 HDPE units weigh 28-32 lb empty (versus 38-42 lb for wood GMA) and carry 4,000-5,000 lb static load ratings. Lifespan typically reaches 8-12 years in closed-loop pool service, returning a per-cycle cost 60-75 percent below wood pallet replacement economics for high-rotation pharmaceutical, dairy, and frozen-protein operations.
Block pallet construction at Florida Pallet Supply uses nine 4-inch hardwood blocks arranged in a 3-by-3 grid with continuous-face top and bottom decks. Each block is precision-cut from kiln-dried hardwood and nailed with eight 3-inch screw-shank fasteners per block. The continuous-face deck is critical for ASRS (Automated Storage and Retrieval Systems) and AGV (Automated Guided Vehicle) compatibility because stringer interruptions in conventional pallets cause sensor read failures that halt automation lines. Block construction also supports true four-way pallet jack entry from all four sides, eliminating the partial-entry limitation of notched stringer pallets.
Florida Pallet Supply's quality management system follows ISO 9001 alignment principles with documented procedures for incoming lumber inspection, build-spec verification, finished-pallet QC, heat treatment monitoring, shipping documentation, and customer complaint resolution. Internal audits run quarterly; external customer audits are accepted on 30-day notice. Statistical process control charts track key dimensions (deck-board thickness, stringer thickness, nail count, moisture content) with control limits set at +/- 5 percent of nominal. Non-conformance is logged, root-caused, and corrective action implemented within 5 business days.
Fork-pocket dimensions and fork-clearance specifications matter for warehouse equipment compatibility. Standard 48x40 GMA pallets provide 3.5-inch fork-pocket height (the gap between top deck and bottom deck created by stringers). This accepts standard 2-inch fork tine height with 1.5 inches of vertical clearance. Heavy-duty pallets with thicker stringers may reduce fork-pocket to 3.25 inches, requiring tine-height verification against your forklift fleet. Florida Pallet Supply confirms fork-pocket dimensions on every custom build to prevent dock-floor mismatch issues.
Yes - when properly inspected and graded. Recycled Grade A pallets must demonstrate no broken or replaced boards, fully legible GMA stamp, and pass dynamic load test before grading. Load capacity meets the 2,500 lb dynamic / 4,600 lb static specification per ASME MH1 2016. Recycled Grade B pallets retain structural integrity but show repaired boards; load capacity is typically reduced to 2,000 lb dynamic for non-critical industrial loads.
Yes. Knockdown (KD) pallets ship flat to save freight space and assemble on-site. Common for international shipments where dimensional weight constraints favor flat-pack. Florida Pallet Supply builds KD pallets in 48x40 GMA and custom sizes; assembly hardware (nails, brackets) included. Per-pallet pricing runs 10-15 percent higher than pre-assembled but freight savings often offset for trans-oceanic shipments.
Yes. Florida Pallet Supply offers API integration with major WMS systems including Manhattan Active, Oracle WMS Cloud, SAP EWM, Blue Yonder, HighJump, and Mecalux Easy. Custom integration with proprietary ERP systems supported via REST API or EDI. Per-pallet barcode data, lot traceability records, treatment certificates, and POD documentation flow automatically to the customer system.
Yes. Florida Pallet Supply welcomes customer tours of the Lakeland and Jacksonville processing yards. Tours typically take 90 minutes and include the receiving dock, inspection stations, heat-treatment kilns, build floor, dispatch staging, and quality records library. 30 days notice required for scheduling. Tours are common during initial vendor qualification and quarterly review for standing-order customers.
CP (Chemical Pallet) series are specialized European specs designed for chemical industry export. CP1 measures 1200x1000mm, CP2 1200x800mm, CP3 1140x1140mm, CP9 1140x1140mm reinforced. All carry ISPM-15 heat treatment. EUR/EPAL pallets measure 1200x800mm, use an 11-board pattern, weigh ~25 kg, and are the dominant general-purpose European spec. Florida Pallet Supply builds both CP and EUR/EPAL for European exporters; lead time 7-10 business days, EPAL certification optional.
Same-day delivery in 19 Florida same-day counties carries no premium over standard pricing for orders confirmed by 2 PM EST. Next-day statewide delivery also has no premium. Emergency dispatch (24/7 outside business hours) carries a $250-500 freight surcharge depending on origin yard and destination distance. Weekend dispatch with 24-hour notice runs $100-250 freight premium for premium-account customers.
Pool pallets are owned by the rental company (CHEP blue, PECO red) and circulate in a closed-loop. You pay per trip and return them. Owned pallets are yours - bought once, depreciated over service life. Pool models work for closed-loop CPG-to-major-retailer flows (Costco, Walmart, Kroger). Owned models work for variable distribution lanes, export, custom specs, and any operation outside the major-retailer pool network. Florida Pallet Supply supplies owned pallets and supports the buy-back program at end-of-life.
Both. Per-pallet pricing is standard for orders under 1,000 pallets per quote. Per-truckload pricing applies when orders fill a 53-foot dry van (~600 pallets for standard 48x40 GMA, ~300 for oversized custom). Truckload pricing typically saves 5-15 percent over per-pallet equivalent because freight bundles efficiently. Standing-order customers receive freight bundled into per-pallet pricing for predictable accounting.
The IPPC stamp is branded into the wood (not painted or stickered) on at least two opposite sides of each pallet, after heat treatment completes. The stamp shows the IPPC wheat-stalk logo, US country code, the facility's APHIS-registered number (assigned by USDA), and the HT treatment code. Hand-drawn, painted, or stickered marks are rejected at customs because they can be falsified. Stamp legibility must survive normal pallet handling for the full export trip.
Wood GMA pallets typically last 8-15 trips in a typical distribution cycle (warehouse to retail and back). Heavy-duty builds with reinforced stringers and 7/8-inch deck boards stretch lifespan to 20+ trips. Block pallets last longer than stringer pallets - typically 25-40 trips - because the continuous-face deck distributes load forces across nine support blocks instead of three stringers.
Yes. Florida Pallet Supply ships mixed orders routinely. Common scenarios: new pallets for high-visibility customer-facing shipments (DTC e-commerce, retail-ready displays) and recycled Grade A for industrial inbound. Pricing applies per pallet type; freight bundles all types on a single truckload. Standing-order programs can lock pricing on a multi-type basket.
Net 30 standard for established customers with credit approval. First three orders run Net 15 or COD. ACH transfer is preferred for invoice payment; credit card accepted with 2.5 percent processing surcharge above $10,000 per transaction. Wire transfer accepted for large orders and international customers. Letter of credit available for export orders over $50,000 on request.
Vendor consolidation programs at Florida 3PL operations typically aim for 3-5 strategic pallet suppliers serving the full mix (new, recycled, custom, ISPM-15). Florida Pallet Supply qualifies as the regional Florida specialist alongside 1-2 national suppliers (typically 48forty for buyback scale and Kamps for Midwest distribution) and a custom-spec specialist for industry-specific builds. This consolidation reduces vendor management overhead while preserving spec flexibility.
Quote turnaround benchmarking shows Florida Pallet Supply's 24-hour standard against industry averages of 3-5 business days for regional suppliers and 5-7 business days for national vendors. Same-day quotes (for standard 48x40 GMA in 50-500 pallet quantities) are common and routinely close before end of business day. This responsiveness matters during inventory crisis events (post-hurricane recovery, sudden volume spike for product launch, supplier failure) when waiting 3 days for a quote means missing the recovery window.
Procurement managers evaluating Florida Pallet Supply for new vendor onboarding typically request: (1) APHIS facility registration certificate for ISPM-15 compliance, (2) ISO 9001 alignment documentation, (3) FDA 21 CFR 178.3520 third-party lab test reports for food-grade stock, (4) sample lumber lot for incoming inspection, (5) reference customers in similar industry vertical, (6) financial stability indicators (D&B report, bonding capacity), (7) hurricane/disaster continuity plan documentation, (8) insurance certificate including general liability and product liability minimums.
Florida Pallet Supply maintains compliance with standards from the National Wooden Pallet & Container Association (NWPCA - palletcentral.com), USDA Animal and Plant Health Inspection Service (APHIS - aphis.usda.gov), International Plant Protection Convention (IPPC ISPM-15 - ippc.int), FDA Food Safety Modernization Act Section 204 (fda.gov), Random Lengths lumber pricing index (randomlengths.com), American Society of Mechanical Engineers MH1 pallet load standard (asme.org), Florida Department of Agriculture (FDACS - fdacs.gov), Customs and Border Protection wood packaging requirements (cbp.gov), Florida Citrus Mutual (flcitrusmutual.com), Florida Tomato Committee (floridatomatoes.org), and the Florida Customs House Brokers Association (flchba.com). Compliance documentation is provided with every export load at no additional charge and supports customer audits, internal QC review, and regulatory submission as required.
Need Pallets Fast?
Get Free Quote →