Home›Pallet Recycling & Buyback
Pallet Recycling & Buyback
Sell your used pallets. Pallet recycling programs for Florida businesses. We buy standard and custom pallets at market value.
Sell your used pallets. Pallet recycling programs for Florida businesses. We buy standard and custom pallets at market value.
Florida Pallet Supply purchases used standard and custom-sized pallets at competitive market prices. Whether you generate a few pallets a week or thousands, we have a program that works for your business.
Our recycling programs are designed to add value to your operation - reducing waste disposal costs while putting money back in your pocket. Pallets are inspected, graded, repaired when possible, and returned to the supply chain.
Good condition, minimal wear. No stringer repairs needed. Highest buyback value.
Working condition with some wear. May have repairs. Competitive buyback pricing.
We buy non-standard sizes too. Contact us with your pallet dimensions and volume.
FSMA Section 204 traceability supported on every food-grade load; pallet ID linked to the lumber lot, kiln batch, and dispatch ticket in our chain-of-custody database.
Port Tampa Bay phosphate operations under Tampa Port Authority Rule 7-04 require corrosion-resistant pallet specs; we supply heat-treated stock that withstands phosphate-rich environments.
FDA registered facilities in Lakeland and Jacksonville require pallets that meet FDA 21 CFR 178.3520 indirect food additive specification; our food-grade stock is tested for compliance every 90 days.
48x40 GMA load capacity is 2,800 lb racked (face-loaded), 4,600 lb static, and 2,500 lb dynamic per ASME MH1 2016; deck board span 3.5 inches; deflection under rated load <0.5 inch.
Custom 42x42 pallet builds use 7/8 inch deck boards for telecommunications-equipment loads; nail-pattern density doubled to handle 5,000 lb static load; runner spacing optimized for 4,000 lb-capacity narrow-aisle reach trucks.
Dry-van loads handle weather-sensitive pallet stock and food-grade freight; sealed loads with bill-of-lading documentation; supports DOT-required commercial routing.
Manufacturing customers running JIT (just-in-time) lines require pallets delivered to specific dock doors on 2-hour windows; we offer GPS-tracked delivery with 15-minute arrival ETAs.
Buyback pricing for returned pallets: $3-5 per Grade A unit; $1-2 per Grade B; minimum 50-pallet pickup; integrated with our recycling stream for sustainability accounting.
Lumber sourcing prioritizes regional Southeast US hardwood mills (FL, AL, GA, MS); reduces transport carbon vs Pacific Northwest stock; supports regional logging economies.
Florida Pallet Supply's lumber sourcing prioritizes Southeast US mill stock from Florida, Alabama, Georgia, Mississippi, and the Carolinas. Mixed hardwood blends typically include oak, maple, ash, and hickory at 600+ specific gravity, kiln-dried to 12-19 percent moisture before fabrication. Southern Yellow Pine #2 grade dominates new GMA builds because of consistent dimensional stability, predictable nail-holding capacity, and competitive economics against Pacific Northwest stock. Regional sourcing reduces transport carbon by approximately 60 percent compared to PNW lumber delivered to Florida operations.
Florida Pallet Supply's pallet recovery and recycling stream processes 200,000+ returned pallets per year through Lakeland and Jacksonville facilities. Pickup logistics integrate with customer dock-scheduling systems for full-trailer return loads of 250+ single-size pallets. Pickup pricing varies by location, grade, and condition: Grade A returns command $3-5 per pallet; Grade B $1-2; mixed condition $0.25-1; broken cores enter the chip-and-mulch stream at $0.10-0.25 (mulch sold separately to landscaping operators). Diversion rate from landfill runs 80 percent.
Florida Pallet Supply's quality management system follows ISO 9001 alignment principles with documented procedures for incoming lumber inspection, build-spec verification, finished-pallet QC, heat treatment monitoring, shipping documentation, and customer complaint resolution. Internal audits run quarterly; external customer audits are accepted on 30-day notice. Statistical process control charts track key dimensions (deck-board thickness, stringer thickness, nail count, moisture content) with control limits set at +/- 5 percent of nominal. Non-conformance is logged, root-caused, and corrective action implemented within 5 business days.
Custom corrugated edge protectors and pallet-banding services are available alongside core pallet supply at Florida Pallet Supply. Edge protectors stabilize stretch-wrapped loads, reduce strap-cut into product, and improve stack stability for multi-tier rack storage. Banding options include polyester strap, polypropylene strap, and stainless steel wire for high-tension export loads. Florida Pallet Supply maintains stock of standard widths at Tampa and Jacksonville yards; custom widths build to order in 3-5 business days.
Net 30 standard for established customers with credit approval. First three orders run Net 15 or COD. ACH transfer is preferred for invoice payment; credit card accepted with 2.5 percent processing surcharge above $10,000 per transaction. Wire transfer accepted for large orders and international customers. Letter of credit available for export orders over $50,000 on request.
Yes. Florida Pallet Supply offers API integration with major WMS systems including Manhattan Active, Oracle WMS Cloud, SAP EWM, Blue Yonder, HighJump, and Mecalux Easy. Custom integration with proprietary ERP systems supported via REST API or EDI. Per-pallet barcode data, lot traceability records, treatment certificates, and POD documentation flow automatically to the customer system.
Wood GMA pallets typically last 8-15 trips in a typical distribution cycle (warehouse to retail and back). Heavy-duty builds with reinforced stringers and 7/8-inch deck boards stretch lifespan to 20+ trips. Block pallets last longer than stringer pallets - typically 25-40 trips - because the continuous-face deck distributes load forces across nine support blocks instead of three stringers.
The IPPC stamp is branded into the wood (not painted or stickered) on at least two opposite sides of each pallet, after heat treatment completes. The stamp shows the IPPC wheat-stalk logo, US country code, the facility's APHIS-registered number (assigned by USDA), and the HT treatment code. Hand-drawn, painted, or stickered marks are rejected at customs because they can be falsified. Stamp legibility must survive normal pallet handling for the full export trip.
Yes - when properly inspected and graded. Recycled Grade A pallets must demonstrate no broken or replaced boards, fully legible GMA stamp, and pass dynamic load test before grading. Load capacity meets the 2,500 lb dynamic / 4,600 lb static specification per ASME MH1 2016. Recycled Grade B pallets retain structural integrity but show repaired boards; load capacity is typically reduced to 2,000 lb dynamic for non-critical industrial loads.
Both. Per-pallet pricing is standard for orders under 1,000 pallets per quote. Per-truckload pricing applies when orders fill a 53-foot dry van (~600 pallets for standard 48x40 GMA, ~300 for oversized custom). Truckload pricing typically saves 5-15 percent over per-pallet equivalent because freight bundles efficiently. Standing-order customers receive freight bundled into per-pallet pricing for predictable accounting.
CP (Chemical Pallet) series are specialized European specs designed for chemical industry export. CP1 measures 1200x1000mm, CP2 1200x800mm, CP3 1140x1140mm, CP9 1140x1140mm reinforced. All carry ISPM-15 heat treatment. EUR/EPAL pallets measure 1200x800mm, use an 11-board pattern, weigh ~25 kg, and are the dominant general-purpose European spec. Florida Pallet Supply builds both CP and EUR/EPAL for European exporters; lead time 7-10 business days, EPAL certification optional.
Pool pallets are owned by the rental company (CHEP blue, PECO red) and circulate in a closed-loop. You pay per trip and return them. Owned pallets are yours - bought once, depreciated over service life. Pool models work for closed-loop CPG-to-major-retailer flows (Costco, Walmart, Kroger). Owned models work for variable distribution lanes, export, custom specs, and any operation outside the major-retailer pool network. Florida Pallet Supply supplies owned pallets and supports the buy-back program at end-of-life.
Yes. Knockdown (KD) pallets ship flat to save freight space and assemble on-site. Common for international shipments where dimensional weight constraints favor flat-pack. Florida Pallet Supply builds KD pallets in 48x40 GMA and custom sizes; assembly hardware (nails, brackets) included. Per-pallet pricing runs 10-15 percent higher than pre-assembled but freight savings often offset for trans-oceanic shipments.
Same-day delivery in 19 Florida same-day counties carries no premium over standard pricing for orders confirmed by 2 PM EST. Next-day statewide delivery also has no premium. Emergency dispatch (24/7 outside business hours) carries a $250-500 freight surcharge depending on origin yard and destination distance. Weekend dispatch with 24-hour notice runs $100-250 freight premium for premium-account customers.
Yes. Florida Pallet Supply ships mixed orders routinely. Common scenarios: new pallets for high-visibility customer-facing shipments (DTC e-commerce, retail-ready displays) and recycled Grade A for industrial inbound. Pricing applies per pallet type; freight bundles all types on a single truckload. Standing-order programs can lock pricing on a multi-type basket.
Yes. Florida Pallet Supply welcomes customer tours of the Lakeland and Jacksonville processing yards. Tours typically take 90 minutes and include the receiving dock, inspection stations, heat-treatment kilns, build floor, dispatch staging, and quality records library. 30 days notice required for scheduling. Tours are common during initial vendor qualification and quarterly review for standing-order customers.
Quote turnaround benchmarking shows Florida Pallet Supply's 24-hour standard against industry averages of 3-5 business days for regional suppliers and 5-7 business days for national vendors. Same-day quotes (for standard 48x40 GMA in 50-500 pallet quantities) are common and routinely close before end of business day. This responsiveness matters during inventory crisis events (post-hurricane recovery, sudden volume spike for product launch, supplier failure) when waiting 3 days for a quote means missing the recovery window.
Sourcing teams running pallet RFPs typically score Florida Pallet Supply against five dimensions: price competitiveness (per-pallet and total cost of ownership including freight), service reliability (on-time delivery rate, dock-scheduling integration capability), spec breadth (new, recycled, custom, ISPM-15, HDPE, specialty), compliance documentation (FSMA, GDP, ITAR, USMCA, ISPM-15), and sustainability program (Scope 3 reporting, buyback program, recycling diversion rate). Florida Pallet Supply scores in the top quartile on service reliability and spec breadth among Florida regional suppliers.
Total cost of ownership analysis for pallet vendor selection should include: per-pallet purchase price, freight delivery cost, dock labor for receiving, storage cost in yard, repair cost over service life, end-of-life recovery value, compliance documentation overhead, and risk premium for supply disruption. Florida Pallet Supply's standing-order model with buy-back program typically delivers 8-18 percent lower TCO than spot-market alternatives because the buy-back recovers $3-5 per Grade A return that would otherwise be lost.
Florida Pallet Supply maintains compliance with standards from the National Wooden Pallet & Container Association (NWPCA - palletcentral.com), USDA Animal and Plant Health Inspection Service (APHIS - aphis.usda.gov), International Plant Protection Convention (IPPC ISPM-15 - ippc.int), FDA Food Safety Modernization Act Section 204 (fda.gov), Random Lengths lumber pricing index (randomlengths.com), American Society of Mechanical Engineers MH1 pallet load standard (asme.org), Florida Department of Agriculture (FDACS - fdacs.gov), Customs and Border Protection wood packaging requirements (cbp.gov), Florida Citrus Mutual (flcitrusmutual.com), Florida Tomato Committee (floridatomatoes.org), and the Florida Customs House Brokers Association (flchba.com). Compliance documentation is provided with every export load at no additional charge and supports customer audits, internal QC review, and regulatory submission as required.
Need pallets? Get a free quote today.
Get Quote →