FPS serves all 1470 Florida ZIP codes.
Click your FL city below to see all ZIP codes FPS serves in that market. Each ZIP page provides delivery cadence, pricing context, and a quote form scoped to that ZIP.
GMA 48x40 four-way stringer construction conforms to the National Wooden Pallet & Container Association (NWPCA) 2014 Uniform Standard; deck board configuration 7-board top, 5-board bottom.
Florida DOACS regulations require ISPM-15 documentation on every export load originating from PortMiami, Port Everglades, JAXPORT, and Port Tampa Bay; we maintain on-call certification staff at all four ports.
Plant City packing operations subject to USDA Marketing Order 905 require pallet markings traceable to the originating farm; we apply per-load barcode tags integrated with the Florida Tomato Committee compliance system.
Block pallets (four-way entry) use nine 4-inch hardwood blocks with continuous-face top deck; ideal for ASRS (automated storage and retrieval) and AGV (automated guided vehicle) operations where stringer interruptions cause read-failures.
Recycled-Grade B pallets meet structural spec but may have up to 2 replaced deck boards; suitable for industrial loads outside food/pharma; price point 30-40% below new GMA.
Buyback programs pay current market rate for returned pallets in Grade A condition; minimum 50 pallets per pickup; integrated with our recycling stream for sustainability reporting.
E-commerce fulfillment centers around Orlando and Lakeland use mixed-SKU GMA pallets for inbound, plus pallets-with-cardboard for outbound to last-mile carriers; we coordinate delivery with their dock-scheduling system (FreightSmart, DOCK365).
Net 30 terms standard for established customers with credit approval; Net 15 or COD for first three orders; credit card and ACH accepted for spot orders.
Sustainability reports provided quarterly to standing-order customers; documents pallets recycled, lumber diverted from landfill, and CO2-equivalent savings vs new-only sourcing.
Fork-pocket dimensions and fork-clearance specifications matter for warehouse equipment compatibility. Standard 48x40 GMA pallets provide 3.5-inch fork-pocket height (the gap between top deck and bottom deck created by stringers). This accepts standard 2-inch fork tine height with 1.5 inches of vertical clearance. Heavy-duty pallets with thicker stringers may reduce fork-pocket to 3.25 inches, requiring tine-height verification against your forklift fleet. Florida Pallet Supply confirms fork-pocket dimensions on every custom build to prevent dock-floor mismatch issues.
Heat treatment to ISPM-15 specification at Florida Pallet Supply runs in computer-monitored kilns sized for 1,200-pallet batch loads. Wood core temperature is verified by 9-point thermocouple grid: 4 surface probes plus 5 deep-core probes inserted into representative deck boards on each batch. Compliance demands 56 degrees Celsius core temperature held for 30 continuous minutes; our standard cycle holds 58 degrees for 35 minutes for a documented compliance buffer. Each batch generates a treatment log with timestamp, temperature curve, kiln number, lumber lot reference, and inspector signature, archived in the chain-of-custody database for the full 7-year retention period required for export verification.
Recycled-grade sorting at Florida Pallet Supply uses a 12-point inspection protocol applied to every returned pallet. Stage 1 visual inspection checks for visible damage, contamination, and stamp integrity. Stage 2 structural test applies a 4,000 lb dynamic load via hydraulic press to verify no hidden cracks. Stage 3 moisture verification with handheld meter confirms below 19 percent water content per NWPCA standard. Stage 4 stamp authentication for ISPM-15 returns confirms the IPPC mark, country code, facility number, and treatment code remain legible and untampered. Pallets failing any stage are routed to repair lane or chip-and-mulch stream; pass-rate runs 73 percent for Grade A, 91 percent across A+B combined.
Pallet weight distribution and load engineering at Florida Pallet Supply follows ASME MH1 2016 standards for dynamic, static, and racked load ratings. Dynamic load (during forklift transport) is set at 60 percent of static load to account for shock and vibration. Racked load (front and back stringer support only, mid-deck unsupported) is set at 60 percent of static load to account for deck deflection. Standard 48x40 GMA: 2,500 lb dynamic, 4,600 lb static, 2,800 lb racked. Heavy-duty 48x40 builds with reinforced deck and double-runner stringers: 4,000 lb dynamic, 7,500 lb static, 5,000 lb racked.
Yes. Florida Pallet Supply offers API integration with major WMS systems including Manhattan Active, Oracle WMS Cloud, SAP EWM, Blue Yonder, HighJump, and Mecalux Easy. Custom integration with proprietary ERP systems supported via REST API or EDI. Per-pallet barcode data, lot traceability records, treatment certificates, and POD documentation flow automatically to the customer system.
Yes. Florida Pallet Supply ships mixed orders routinely. Common scenarios: new pallets for high-visibility customer-facing shipments (DTC e-commerce, retail-ready displays) and recycled Grade A for industrial inbound. Pricing applies per pallet type; freight bundles all types on a single truckload. Standing-order programs can lock pricing on a multi-type basket.
Same-day delivery in 19 Florida same-day counties carries no premium over standard pricing for orders confirmed by 2 PM EST. Next-day statewide delivery also has no premium. Emergency dispatch (24/7 outside business hours) carries a $250-500 freight surcharge depending on origin yard and destination distance. Weekend dispatch with 24-hour notice runs $100-250 freight premium for premium-account customers.
Wood GMA pallets typically last 8-15 trips in a typical distribution cycle (warehouse to retail and back). Heavy-duty builds with reinforced stringers and 7/8-inch deck boards stretch lifespan to 20+ trips. Block pallets last longer than stringer pallets - typically 25-40 trips - because the continuous-face deck distributes load forces across nine support blocks instead of three stringers.
Yes - when properly inspected and graded. Recycled Grade A pallets must demonstrate no broken or replaced boards, fully legible GMA stamp, and pass dynamic load test before grading. Load capacity meets the 2,500 lb dynamic / 4,600 lb static specification per ASME MH1 2016. Recycled Grade B pallets retain structural integrity but show repaired boards; load capacity is typically reduced to 2,000 lb dynamic for non-critical industrial loads.
Net 30 standard for established customers with credit approval. First three orders run Net 15 or COD. ACH transfer is preferred for invoice payment; credit card accepted with 2.5 percent processing surcharge above $10,000 per transaction. Wire transfer accepted for large orders and international customers. Letter of credit available for export orders over $50,000 on request.
The IPPC stamp is branded into the wood (not painted or stickered) on at least two opposite sides of each pallet, after heat treatment completes. The stamp shows the IPPC wheat-stalk logo, US country code, the facility's APHIS-registered number (assigned by USDA), and the HT treatment code. Hand-drawn, painted, or stickered marks are rejected at customs because they can be falsified. Stamp legibility must survive normal pallet handling for the full export trip.
Yes. Florida Pallet Supply welcomes customer tours of the Lakeland and Jacksonville processing yards. Tours typically take 90 minutes and include the receiving dock, inspection stations, heat-treatment kilns, build floor, dispatch staging, and quality records library. 30 days notice required for scheduling. Tours are common during initial vendor qualification and quarterly review for standing-order customers.
Pool pallets are owned by the rental company (CHEP blue, PECO red) and circulate in a closed-loop. You pay per trip and return them. Owned pallets are yours - bought once, depreciated over service life. Pool models work for closed-loop CPG-to-major-retailer flows (Costco, Walmart, Kroger). Owned models work for variable distribution lanes, export, custom specs, and any operation outside the major-retailer pool network. Florida Pallet Supply supplies owned pallets and supports the buy-back program at end-of-life.
Both. Per-pallet pricing is standard for orders under 1,000 pallets per quote. Per-truckload pricing applies when orders fill a 53-foot dry van (~600 pallets for standard 48x40 GMA, ~300 for oversized custom). Truckload pricing typically saves 5-15 percent over per-pallet equivalent because freight bundles efficiently. Standing-order customers receive freight bundled into per-pallet pricing for predictable accounting.
CP (Chemical Pallet) series are specialized European specs designed for chemical industry export. CP1 measures 1200x1000mm, CP2 1200x800mm, CP3 1140x1140mm, CP9 1140x1140mm reinforced. All carry ISPM-15 heat treatment. EUR/EPAL pallets measure 1200x800mm, use an 11-board pattern, weigh ~25 kg, and are the dominant general-purpose European spec. Florida Pallet Supply builds both CP and EUR/EPAL for European exporters; lead time 7-10 business days, EPAL certification optional.
Yes. Knockdown (KD) pallets ship flat to save freight space and assemble on-site. Common for international shipments where dimensional weight constraints favor flat-pack. Florida Pallet Supply builds KD pallets in 48x40 GMA and custom sizes; assembly hardware (nails, brackets) included. Per-pallet pricing runs 10-15 percent higher than pre-assembled but freight savings often offset for trans-oceanic shipments.
Procurement managers evaluating Florida Pallet Supply for new vendor onboarding typically request: (1) APHIS facility registration certificate for ISPM-15 compliance, (2) ISO 9001 alignment documentation, (3) FDA 21 CFR 178.3520 third-party lab test reports for food-grade stock, (4) sample lumber lot for incoming inspection, (5) reference customers in similar industry vertical, (6) financial stability indicators (D&B report, bonding capacity), (7) hurricane/disaster continuity plan documentation, (8) insurance certificate including general liability and product liability minimums.
Vendor qualification timelines at major Florida operations (Publix, Walmart Florida DCs, Tropicana, Florida pharmaceutical distributors) typically run 60-120 days from RFP submission to first PO. Florida Pallet Supply provides standardized qualification packet within 48 hours of request, accelerating timeline to the customer-side review phase. Standing-order agreements typically execute within 21 days of qualified-vendor status approval.
Sourcing teams running pallet RFPs typically score Florida Pallet Supply against five dimensions: price competitiveness (per-pallet and total cost of ownership including freight), service reliability (on-time delivery rate, dock-scheduling integration capability), spec breadth (new, recycled, custom, ISPM-15, HDPE, specialty), compliance documentation (FSMA, GDP, ITAR, USMCA, ISPM-15), and sustainability program (Scope 3 reporting, buyback program, recycling diversion rate). Florida Pallet Supply scores in the top quartile on service reliability and spec breadth among Florida regional suppliers.
Florida Pallet Supply maintains compliance with standards from the National Wooden Pallet & Container Association (NWPCA - palletcentral.com), USDA Animal and Plant Health Inspection Service (APHIS - aphis.usda.gov), International Plant Protection Convention (IPPC ISPM-15 - ippc.int), FDA Food Safety Modernization Act Section 204 (fda.gov), Random Lengths lumber pricing index (randomlengths.com), American Society of Mechanical Engineers MH1 pallet load standard (asme.org), Florida Department of Agriculture (FDACS - fdacs.gov), Customs and Border Protection wood packaging requirements (cbp.gov), Florida Citrus Mutual (flcitrusmutual.com), Florida Tomato Committee (floridatomatoes.org), and the Florida Customs House Brokers Association (flchba.com). Compliance documentation is provided with every export load at no additional charge and supports customer audits, internal QC review, and regulatory submission as required.