Florida Pallet Supply for Citrus & Produce operations dispatching through JAXPORT (Jacksonville).
Florida Pallet Supply dispatches pallets daily to Citrus & Produce operations utilizing JAXPORT (Jacksonville). 3rd largest East Coast container port; #1 US auto port. Destinations served: Europe, Mexico, Caribbean, auto exports.
Florida produces 70% of US citrus; FSMA + ISPM-15 export pallets.
| Parameter | Value |
|---|---|
| Port Name | JAXPORT (Jacksonville) |
| Coordinates | 30.3994, -81.6195 |
| Specialty | 3rd largest East Coast container port; #1 US auto port |
| Destinations | Europe, Mexico, Caribbean, auto exports |
| FPS Dispatch | Same-day in core FL markets |
Same-day shipping in our Southeast/Mid-Atlantic core (FL, GA, AL, TN, MS, SC, NC, KY, VA) and scheduled weekly delivery elsewhere. Express options available for JAXPORT (Jacksonville) rush orders. Quote response under 2 business hours, dispatch within hours of order confirmation.
Yes. Standing-order programs for JAXPORT (Jacksonville) operations running 500+ pallets/week lock in tiered pricing, reserve delivery slots, and run on autopilot in the background. Custom contract terms available for accounts running 2,000+/week.
Yes. Backhaul logistics are coordinated on outbound delivery routes - empty or non-spec pallets get picked up on the return leg of new pallet deliveries. Per-pallet freight cost on the backhaul approaches zero for accounts running both new-pallet purchase + buyback simultaneously.
Net-30 credit terms standard after the first 1-3 prepaid or COD loads while credit is being established. Submit a credit application with three trade references; approval typically processes within 48 hours. Volume accounts can negotiate net-45 or net-60.
Yes, with ISPM-15 heat-treated pallets carrying IPPC stamps and full ISPM-15 documentation. Required for international shipments to all WTO member countries. Common for JAXPORT (Jacksonville) customers with port access via Florida's major export gateways.
GMA 48x40 four-way stringer construction conforms to the National Wooden Pallet & Container Association (NWPCA) 2014 Uniform Standard; deck board configuration 7-board top, 5-board bottom.
FL DEP solid-waste rules classify wood pallets as recyclable; our recycled pallet stream qualifies for the FL Recycling Business Assistance Center small-business grant program.
Port Tampa Bay phosphate operations under Tampa Port Authority Rule 7-04 require corrosion-resistant pallet specs; we supply heat-treated stock that withstands phosphate-rich environments.
Standard 48x40 GMA pallets feature 5/8 inch deck boards with a 4-board face pattern; bottom configuration is 3-board for four-way fork entry; nail pattern uses 2.5 inch screw-shank galvanized fasteners.
48x40 GMA load capacity is 2,800 lb racked (face-loaded), 4,600 lb static, and 2,500 lb dynamic per ASME MH1 2016; deck board span 3.5 inches; deflection under rated load <0.5 inch.
Standing-order programs schedule a recurring weekly truckload (or partial) for the same delivery window; price-locked for 12 months; preferred for 3PL warehouse refill cycles.
Concrete and aggregate suppliers use bagged-goods stringers (heavier construction, denser nail pattern) to support 4,000+ lb cement-sack loads; we stock these in our Tampa Bay and Jacksonville warehouses.
Custom pallet pricing depends on lumber spec, build complexity, and quantity: small runs (50-200 units) typically $35-55 per unit; large runs (500+ units) drop to $22-32 per unit; quotes returned in <2 hours.
Sustainability reports provided quarterly to standing-order customers; documents pallets recycled, lumber diverted from landfill, and CO2-equivalent savings vs new-only sourcing.
Florida Pallet Supply's quality management system follows ISO 9001 alignment principles with documented procedures for incoming lumber inspection, build-spec verification, finished-pallet QC, heat treatment monitoring, shipping documentation, and customer complaint resolution. Internal audits run quarterly; external customer audits are accepted on 30-day notice. Statistical process control charts track key dimensions (deck-board thickness, stringer thickness, nail count, moisture content) with control limits set at +/- 5 percent of nominal. Non-conformance is logged, root-caused, and corrective action implemented within 5 business days.
Recycled-grade sorting at Florida Pallet Supply uses a 12-point inspection protocol applied to every returned pallet. Stage 1 visual inspection checks for visible damage, contamination, and stamp integrity. Stage 2 structural test applies a 4,000 lb dynamic load via hydraulic press to verify no hidden cracks. Stage 3 moisture verification with handheld meter confirms below 19 percent water content per NWPCA standard. Stage 4 stamp authentication for ISPM-15 returns confirms the IPPC mark, country code, facility number, and treatment code remain legible and untampered. Pallets failing any stage are routed to repair lane or chip-and-mulch stream; pass-rate runs 73 percent for Grade A, 91 percent across A+B combined.
Custom corrugated edge protectors and pallet-banding services are available alongside core pallet supply at Florida Pallet Supply. Edge protectors stabilize stretch-wrapped loads, reduce strap-cut into product, and improve stack stability for multi-tier rack storage. Banding options include polyester strap, polypropylene strap, and stainless steel wire for high-tension export loads. Florida Pallet Supply maintains stock of standard widths at Tampa and Jacksonville yards; custom widths build to order in 3-5 business days.
Custom build-to-print pallets at Florida Pallet Supply begin with a CAD review against customer drawings, followed by lumber procurement matched to the spec. Aerospace-grade builds typically specify 7/8-inch deck boards, double-runner stringers with 3-inch block spacing, foam-lined cavity inserts for component protection, and humidity-control packets (silica gel or molecular sieve) inserted between deck layers. Lead time runs 5 to 10 business days depending on quantity and special-material availability. Each finished custom pallet receives a serial number etched into the lumber and entered into the customer chain-of-custody record before dispatch.
CP (Chemical Pallet) series are specialized European specs designed for chemical industry export. CP1 measures 1200x1000mm, CP2 1200x800mm, CP3 1140x1140mm, CP9 1140x1140mm reinforced. All carry ISPM-15 heat treatment. EUR/EPAL pallets measure 1200x800mm, use an 11-board pattern, weigh ~25 kg, and are the dominant general-purpose European spec. Florida Pallet Supply builds both CP and EUR/EPAL for European exporters; lead time 7-10 business days, EPAL certification optional.
The IPPC stamp is branded into the wood (not painted or stickered) on at least two opposite sides of each pallet, after heat treatment completes. The stamp shows the IPPC wheat-stalk logo, US country code, the facility's APHIS-registered number (assigned by USDA), and the HT treatment code. Hand-drawn, painted, or stickered marks are rejected at customs because they can be falsified. Stamp legibility must survive normal pallet handling for the full export trip.
Yes - when properly inspected and graded. Recycled Grade A pallets must demonstrate no broken or replaced boards, fully legible GMA stamp, and pass dynamic load test before grading. Load capacity meets the 2,500 lb dynamic / 4,600 lb static specification per ASME MH1 2016. Recycled Grade B pallets retain structural integrity but show repaired boards; load capacity is typically reduced to 2,000 lb dynamic for non-critical industrial loads.
Both. Per-pallet pricing is standard for orders under 1,000 pallets per quote. Per-truckload pricing applies when orders fill a 53-foot dry van (~600 pallets for standard 48x40 GMA, ~300 for oversized custom). Truckload pricing typically saves 5-15 percent over per-pallet equivalent because freight bundles efficiently. Standing-order customers receive freight bundled into per-pallet pricing for predictable accounting.
Wood GMA pallets typically last 8-15 trips in a typical distribution cycle (warehouse to retail and back). Heavy-duty builds with reinforced stringers and 7/8-inch deck boards stretch lifespan to 20+ trips. Block pallets last longer than stringer pallets - typically 25-40 trips - because the continuous-face deck distributes load forces across nine support blocks instead of three stringers.
Yes. Knockdown (KD) pallets ship flat to save freight space and assemble on-site. Common for international shipments where dimensional weight constraints favor flat-pack. Florida Pallet Supply builds KD pallets in 48x40 GMA and custom sizes; assembly hardware (nails, brackets) included. Per-pallet pricing runs 10-15 percent higher than pre-assembled but freight savings often offset for trans-oceanic shipments.
Yes. Florida Pallet Supply welcomes customer tours of the Lakeland and Jacksonville processing yards. Tours typically take 90 minutes and include the receiving dock, inspection stations, heat-treatment kilns, build floor, dispatch staging, and quality records library. 30 days notice required for scheduling. Tours are common during initial vendor qualification and quarterly review for standing-order customers.
Yes. Florida Pallet Supply offers API integration with major WMS systems including Manhattan Active, Oracle WMS Cloud, SAP EWM, Blue Yonder, HighJump, and Mecalux Easy. Custom integration with proprietary ERP systems supported via REST API or EDI. Per-pallet barcode data, lot traceability records, treatment certificates, and POD documentation flow automatically to the customer system.
Same-day delivery in 19 Florida same-day counties carries no premium over standard pricing for orders confirmed by 2 PM EST. Next-day statewide delivery also has no premium. Emergency dispatch (24/7 outside business hours) carries a $250-500 freight surcharge depending on origin yard and destination distance. Weekend dispatch with 24-hour notice runs $100-250 freight premium for premium-account customers.
Yes. Florida Pallet Supply ships mixed orders routinely. Common scenarios: new pallets for high-visibility customer-facing shipments (DTC e-commerce, retail-ready displays) and recycled Grade A for industrial inbound. Pricing applies per pallet type; freight bundles all types on a single truckload. Standing-order programs can lock pricing on a multi-type basket.
Pool pallets are owned by the rental company (CHEP blue, PECO red) and circulate in a closed-loop. You pay per trip and return them. Owned pallets are yours - bought once, depreciated over service life. Pool models work for closed-loop CPG-to-major-retailer flows (Costco, Walmart, Kroger). Owned models work for variable distribution lanes, export, custom specs, and any operation outside the major-retailer pool network. Florida Pallet Supply supplies owned pallets and supports the buy-back program at end-of-life.
Net 30 standard for established customers with credit approval. First three orders run Net 15 or COD. ACH transfer is preferred for invoice payment; credit card accepted with 2.5 percent processing surcharge above $10,000 per transaction. Wire transfer accepted for large orders and international customers. Letter of credit available for export orders over $50,000 on request.
Vendor qualification timelines at major Florida operations (Publix, Walmart Florida DCs, Tropicana, Florida pharmaceutical distributors) typically run 60-120 days from RFP submission to first PO. Florida Pallet Supply provides standardized qualification packet within 48 hours of request, accelerating timeline to the customer-side review phase. Standing-order agreements typically execute within 21 days of qualified-vendor status approval.
Sourcing teams running pallet RFPs typically score Florida Pallet Supply against five dimensions: price competitiveness (per-pallet and total cost of ownership including freight), service reliability (on-time delivery rate, dock-scheduling integration capability), spec breadth (new, recycled, custom, ISPM-15, HDPE, specialty), compliance documentation (FSMA, GDP, ITAR, USMCA, ISPM-15), and sustainability program (Scope 3 reporting, buyback program, recycling diversion rate). Florida Pallet Supply scores in the top quartile on service reliability and spec breadth among Florida regional suppliers.
Quote turnaround benchmarking shows Florida Pallet Supply's 24-hour standard against industry averages of 3-5 business days for regional suppliers and 5-7 business days for national vendors. Same-day quotes (for standard 48x40 GMA in 50-500 pallet quantities) are common and routinely close before end of business day. This responsiveness matters during inventory crisis events (post-hurricane recovery, sudden volume spike for product launch, supplier failure) when waiting 3 days for a quote means missing the recovery window.
Florida Pallet Supply maintains compliance with standards from the National Wooden Pallet & Container Association (NWPCA - palletcentral.com), USDA Animal and Plant Health Inspection Service (APHIS - aphis.usda.gov), International Plant Protection Convention (IPPC ISPM-15 - ippc.int), FDA Food Safety Modernization Act Section 204 (fda.gov), Random Lengths lumber pricing index (randomlengths.com), American Society of Mechanical Engineers MH1 pallet load standard (asme.org), Florida Department of Agriculture (FDACS - fdacs.gov), Customs and Border Protection wood packaging requirements (cbp.gov), Florida Citrus Mutual (flcitrusmutual.com), Florida Tomato Committee (floridatomatoes.org), and the Florida Customs House Brokers Association (flchba.com). Compliance documentation is provided with every export load at no additional charge and supports customer audits, internal QC review, and regulatory submission as required.