Comparing FPS and CHEP from a Florida operations perspective: response time, FL-climate spec, hurricane preparedness, FL port coverage, FL-vertical expertise.
Get a FL Quote →CHEP is the largest global pallet pool program. Blue pool pallets owned by CHEP, rented to shippers with per-trip + leakage fees. FPS is the FL purchase alternative.
| Aspect | Florida Pallet Supply | CHEP |
|---|---|---|
| Ownership | You own the pallets - no leakage fees | CHEP owns - $30-50 leakage fee per lost pallet |
| Pricing | Fixed $11-28/pallet purchase | $3-7/trip + leakage + lost-pallet penalties |
| Fl Coverage | FL-native same-day | Limited FL hub coverage |
| Fl Flexibility | Custom + recycled + new mix | Pool-only standard 48x40 |
| Hurricane | Pre-June capacity locked | No FL-specific hurricane program |
| Roi Breakeven | Owned wins at 3+ trips/year | CHEP wins for 1-2 trip use cases |
CHEP serves the national market. If your operations span 30+ states with no FL-specific concentration, the national-scale supplier may offer better per-pallet pricing on multi-state programs. For FL-concentrated operations, FPS wins on response time + local expertise + hurricane resilience.
Same-day Florida response.
FSMA Section 204 traceability supported on every food-grade load; pallet ID linked to the lumber lot, kiln batch, and dispatch ticket in our chain-of-custody database.
Florida DOACS regulations require ISPM-15 documentation on every export load originating from PortMiami, Port Everglades, JAXPORT, and Port Tampa Bay; we maintain on-call certification staff at all four ports.
FL DEP solid-waste rules classify wood pallets as recyclable; our recycled pallet stream qualifies for the FL Recycling Business Assistance Center small-business grant program.
Deck board edge type defaults to chamfered for forklift safety; square-edge available on request for ASRS compatibility; rounded-edge banding tracks available for high-throughput line-side delivery.
Custom 42x42 pallet builds use 7/8 inch deck boards for telecommunications-equipment loads; nail-pattern density doubled to handle 5,000 lb static load; runner spacing optimized for 4,000 lb-capacity narrow-aisle reach trucks.
Dry-van loads handle weather-sensitive pallet stock and food-grade freight; sealed loads with bill-of-lading documentation; supports DOT-required commercial routing.
Citrus packhouses operate seasonal volume peaks November-April; we maintain dedicated Polk County and Indian River inventory to support 6-12 truckload weekly delivery during peak; standing-order pricing locks rates Oct 1.
Custom pallet pricing depends on lumber spec, build complexity, and quantity: small runs (50-200 units) typically $35-55 per unit; large runs (500+ units) drop to $22-32 per unit; quotes returned in <2 hours.
Carbon footprint per delivered pallet (cradle-to-gate, including 75-mile delivery): new GMA ~21 kg CO2e; recycled Grade A ~7 kg CO2e; custom builds vary by spec.
Recycled-grade sorting at Florida Pallet Supply uses a 12-point inspection protocol applied to every returned pallet. Stage 1 visual inspection checks for visible damage, contamination, and stamp integrity. Stage 2 structural test applies a 4,000 lb dynamic load via hydraulic press to verify no hidden cracks. Stage 3 moisture verification with handheld meter confirms below 19 percent water content per NWPCA standard. Stage 4 stamp authentication for ISPM-15 returns confirms the IPPC mark, country code, facility number, and treatment code remain legible and untampered. Pallets failing any stage are routed to repair lane or chip-and-mulch stream; pass-rate runs 73 percent for Grade A, 91 percent across A+B combined.
Custom build-to-print pallets at Florida Pallet Supply begin with a CAD review against customer drawings, followed by lumber procurement matched to the spec. Aerospace-grade builds typically specify 7/8-inch deck boards, double-runner stringers with 3-inch block spacing, foam-lined cavity inserts for component protection, and humidity-control packets (silica gel or molecular sieve) inserted between deck layers. Lead time runs 5 to 10 business days depending on quantity and special-material availability. Each finished custom pallet receives a serial number etched into the lumber and entered into the customer chain-of-custody record before dispatch.
Florida Pallet Supply's lumber sourcing prioritizes Southeast US mill stock from Florida, Alabama, Georgia, Mississippi, and the Carolinas. Mixed hardwood blends typically include oak, maple, ash, and hickory at 600+ specific gravity, kiln-dried to 12-19 percent moisture before fabrication. Southern Yellow Pine #2 grade dominates new GMA builds because of consistent dimensional stability, predictable nail-holding capacity, and competitive economics against Pacific Northwest stock. Regional sourcing reduces transport carbon by approximately 60 percent compared to PNW lumber delivered to Florida operations.
Florida Pallet Supply's quality management system follows ISO 9001 alignment principles with documented procedures for incoming lumber inspection, build-spec verification, finished-pallet QC, heat treatment monitoring, shipping documentation, and customer complaint resolution. Internal audits run quarterly; external customer audits are accepted on 30-day notice. Statistical process control charts track key dimensions (deck-board thickness, stringer thickness, nail count, moisture content) with control limits set at +/- 5 percent of nominal. Non-conformance is logged, root-caused, and corrective action implemented within 5 business days.
Same-day delivery in 19 Florida same-day counties carries no premium over standard pricing for orders confirmed by 2 PM EST. Next-day statewide delivery also has no premium. Emergency dispatch (24/7 outside business hours) carries a $250-500 freight surcharge depending on origin yard and destination distance. Weekend dispatch with 24-hour notice runs $100-250 freight premium for premium-account customers.
The IPPC stamp is branded into the wood (not painted or stickered) on at least two opposite sides of each pallet, after heat treatment completes. The stamp shows the IPPC wheat-stalk logo, US country code, the facility's APHIS-registered number (assigned by USDA), and the HT treatment code. Hand-drawn, painted, or stickered marks are rejected at customs because they can be falsified. Stamp legibility must survive normal pallet handling for the full export trip.
Net 30 standard for established customers with credit approval. First three orders run Net 15 or COD. ACH transfer is preferred for invoice payment; credit card accepted with 2.5 percent processing surcharge above $10,000 per transaction. Wire transfer accepted for large orders and international customers. Letter of credit available for export orders over $50,000 on request.
Wood GMA pallets typically last 8-15 trips in a typical distribution cycle (warehouse to retail and back). Heavy-duty builds with reinforced stringers and 7/8-inch deck boards stretch lifespan to 20+ trips. Block pallets last longer than stringer pallets - typically 25-40 trips - because the continuous-face deck distributes load forces across nine support blocks instead of three stringers.
Yes. Florida Pallet Supply ships mixed orders routinely. Common scenarios: new pallets for high-visibility customer-facing shipments (DTC e-commerce, retail-ready displays) and recycled Grade A for industrial inbound. Pricing applies per pallet type; freight bundles all types on a single truckload. Standing-order programs can lock pricing on a multi-type basket.
Both. Per-pallet pricing is standard for orders under 1,000 pallets per quote. Per-truckload pricing applies when orders fill a 53-foot dry van (~600 pallets for standard 48x40 GMA, ~300 for oversized custom). Truckload pricing typically saves 5-15 percent over per-pallet equivalent because freight bundles efficiently. Standing-order customers receive freight bundled into per-pallet pricing for predictable accounting.
Yes - when properly inspected and graded. Recycled Grade A pallets must demonstrate no broken or replaced boards, fully legible GMA stamp, and pass dynamic load test before grading. Load capacity meets the 2,500 lb dynamic / 4,600 lb static specification per ASME MH1 2016. Recycled Grade B pallets retain structural integrity but show repaired boards; load capacity is typically reduced to 2,000 lb dynamic for non-critical industrial loads.
Pool pallets are owned by the rental company (CHEP blue, PECO red) and circulate in a closed-loop. You pay per trip and return them. Owned pallets are yours - bought once, depreciated over service life. Pool models work for closed-loop CPG-to-major-retailer flows (Costco, Walmart, Kroger). Owned models work for variable distribution lanes, export, custom specs, and any operation outside the major-retailer pool network. Florida Pallet Supply supplies owned pallets and supports the buy-back program at end-of-life.
Yes. Florida Pallet Supply welcomes customer tours of the Lakeland and Jacksonville processing yards. Tours typically take 90 minutes and include the receiving dock, inspection stations, heat-treatment kilns, build floor, dispatch staging, and quality records library. 30 days notice required for scheduling. Tours are common during initial vendor qualification and quarterly review for standing-order customers.
CP (Chemical Pallet) series are specialized European specs designed for chemical industry export. CP1 measures 1200x1000mm, CP2 1200x800mm, CP3 1140x1140mm, CP9 1140x1140mm reinforced. All carry ISPM-15 heat treatment. EUR/EPAL pallets measure 1200x800mm, use an 11-board pattern, weigh ~25 kg, and are the dominant general-purpose European spec. Florida Pallet Supply builds both CP and EUR/EPAL for European exporters; lead time 7-10 business days, EPAL certification optional.
Yes. Knockdown (KD) pallets ship flat to save freight space and assemble on-site. Common for international shipments where dimensional weight constraints favor flat-pack. Florida Pallet Supply builds KD pallets in 48x40 GMA and custom sizes; assembly hardware (nails, brackets) included. Per-pallet pricing runs 10-15 percent higher than pre-assembled but freight savings often offset for trans-oceanic shipments.
Yes. Florida Pallet Supply offers API integration with major WMS systems including Manhattan Active, Oracle WMS Cloud, SAP EWM, Blue Yonder, HighJump, and Mecalux Easy. Custom integration with proprietary ERP systems supported via REST API or EDI. Per-pallet barcode data, lot traceability records, treatment certificates, and POD documentation flow automatically to the customer system.
Quote turnaround benchmarking shows Florida Pallet Supply's 24-hour standard against industry averages of 3-5 business days for regional suppliers and 5-7 business days for national vendors. Same-day quotes (for standard 48x40 GMA in 50-500 pallet quantities) are common and routinely close before end of business day. This responsiveness matters during inventory crisis events (post-hurricane recovery, sudden volume spike for product launch, supplier failure) when waiting 3 days for a quote means missing the recovery window.
Procurement managers evaluating Florida Pallet Supply for new vendor onboarding typically request: (1) APHIS facility registration certificate for ISPM-15 compliance, (2) ISO 9001 alignment documentation, (3) FDA 21 CFR 178.3520 third-party lab test reports for food-grade stock, (4) sample lumber lot for incoming inspection, (5) reference customers in similar industry vertical, (6) financial stability indicators (D&B report, bonding capacity), (7) hurricane/disaster continuity plan documentation, (8) insurance certificate including general liability and product liability minimums.
Sourcing teams running pallet RFPs typically score Florida Pallet Supply against five dimensions: price competitiveness (per-pallet and total cost of ownership including freight), service reliability (on-time delivery rate, dock-scheduling integration capability), spec breadth (new, recycled, custom, ISPM-15, HDPE, specialty), compliance documentation (FSMA, GDP, ITAR, USMCA, ISPM-15), and sustainability program (Scope 3 reporting, buyback program, recycling diversion rate). Florida Pallet Supply scores in the top quartile on service reliability and spec breadth among Florida regional suppliers.
Florida Pallet Supply maintains compliance with standards from the National Wooden Pallet & Container Association (NWPCA - palletcentral.com), USDA Animal and Plant Health Inspection Service (APHIS - aphis.usda.gov), International Plant Protection Convention (IPPC ISPM-15 - ippc.int), FDA Food Safety Modernization Act Section 204 (fda.gov), Random Lengths lumber pricing index (randomlengths.com), American Society of Mechanical Engineers MH1 pallet load standard (asme.org), Florida Department of Agriculture (FDACS - fdacs.gov), Customs and Border Protection wood packaging requirements (cbp.gov), Florida Citrus Mutual (flcitrusmutual.com), Florida Tomato Committee (floridatomatoes.org), and the Florida Customs House Brokers Association (flchba.com). Compliance documentation is provided with every export load at no additional charge and supports customer audits, internal QC review, and regulatory submission as required.